Frigidaire Gallery French Door Refrigerator Ice Maker Not Working

When removing or replacing the ice bin avoid rotating the auger in the ice bin.

Frigidaire gallery french door refrigerator ice maker not working.

Remove power from the appliance before performing this test. If the bottom of the refrigerator is covered in ice it it most likely leaking down from a blockage or unsecure water lines. If the dispenser door motor is defective the dispenser door won t open. If the motor is not operating then you can check it for continuity with a multi meter.

The dispenser door motor opens and closes the dispenser door to prevent cold air from escaping the freezer. Ice maker switch turned off. If the refrigerator ice maker is not working check the ice maker switch. This switch frequently gets turned off by accident.

Fghb2844lfe frigidaire gallery french door refrigerator not making ice. Can you give us the model number to help guide you further. The first thing to do is open the left french door of the refrigerator take out the ice cube box and look for a frosted and iced up im evaporator fan. The freezer temperature should be set between 0 and 5 degrees fahrenheit 18 to 15c for the ice maker to work properly.

To figure out which pull the unit out from the wall and remove the lower panel in the back. If the motor has continuity then you should verify that the motor is receiving power when ice dispense is selected. If the switch is turned on but the ice maker still doesn t work check the switch for continuity with an ohm meter. To determine if the motor is defective first determine if the motor is getting power.

If the auger is not properly aligned the refrigerator will not dispense ice and or the door may not close properly. If the freezer temperature is too high ensure that the condenser coils are clear of debris and the condenser fan is working properly. Getting into ice. Kitchenaid french door freezer ice maker not making ice cubes but dispenses water.

If the auger is accidentally rotated you must realign the auger by turning it in 45 degree turns until the ice bin fits into place. The ice maker is turned on and makes noises as if it were making ice but when we check to see the progress no ice is in the tray. Trace the line from the ice maker down the back side of the unit to the valve now pull the water line for the ice maker out of the valve and blow into the waterline. As a result the di spenser will not dispense ice.

38 degrees are within an acceptable range for the ice maker to be functioning properly.